Tile and Ceramic Adhesives

Strong Bonding – Long-Life Solutions

Superior Bonding Strength

Advanced Performance on Demanding Surfaces

High Durability

Maximum Resistance and Secure Adhesion

Sustainable Building Systems

Long-Lasting Products for Modern Architecture

FİXA Tile and Ceramic Adhesives for Modern Architecture

Discover innovative ceramic installation components that push technical boundaries while providing high adhesion to surfaces.
From the most demanding floors to giant porcelain surfaces, aim for perfection at every point with the assurance of FİXA!

What is Tile and Ceramic Adhesive?

What is Tile and Ceramic Adhesive?

Ceramic Tile Adhesive is a high-performance bonding mortar that ensures the secure fixing of coating materials such as ceramics, porcelain, granite, marble and natural stone to vertical or horizontal surfaces. Unlike traditional methods, modern adhesives are enriched with polymers and chemical additives to provide much stronger adhesion. These materials offer flexibility based on the surface characteristics and the weight of the coating, effectively absorbing thermal expansions. They extend the structural life by integrating coatings with the substrate in both interior designs and demanding exterior conditions like facades.

Why is Tile and Ceramic Adhesive Important

Why is Tile and Ceramic Adhesive Important?

Selecting the right adhesive is critical not only for aesthetics but also for the safety and durability of the application:

  • Prevents Detachment and Falls: High bonding strength prevents heavy slabs from slipping or falling, especially on vertical surfaces.
  • Provides Resistance to Thermal Shocks: It manages expansion differences on underfloor heated floors or sun-exposed facades, preventing cracks.
  • Supports Sealing: By ensuring full integration with the layer under the ceramic, it creates an additional barrier against moisture seeping into lower layers.

Which Products are Used in Tile and Ceramic Bonding

Which Products are Used in Tile and Ceramic Bonding?

The products to be used vary according to the type of substrate, the nature of the coating material and environmental conditions. While standard and flexible cement-based adhesives are the most common solutions, acrylic-based ready-to-use products for special surfaces or epoxy-based adhesives for areas requiring high chemical resistance should be preferred. Primers that balance surface absorption before application, as well as appropriate notched trowels and joint spacers that complement bonding performance during application, are essential.

FİXA TILE AND CERAMIC ADHESIVES

ADHERA

Adhesion-enhancing acrylic primer for improved surface bonding.

 

 

 

Applications: For ceramic-on-ceramic, painted surfaces, and indoor & outdoor use.

FIXA Fast Setting Tile and Ceramic Adhesive Mortar

High-performance and stable, slip-reducing powder adhesive mortar (C1FT).

 

 

Applications: Applying ceramic tiles to old granite and marble surfaces.

HIGHFLEX Granite Ceramic Adhesive Mortar

High-performance, flexible, slip-resistant adhesive mortar (C2TES1)

 

 

Applications: Suitable for large tiles, natural stone, and indoor & outdoor surfaces.,

HIGHFLEX PRO Granite Ceramic Adhesive Mortar

High-performance, extra flexible, slip-resistant adhesive mortar (C2TES2)

 

Applications: For large tiles, natural stone, and demanding indoor & outdoor areas.

FIXA Fast Setting Granite Ceramic Adhesive Mortar

Fast-setting, high-performance, slip-resistant adhesive mortar (C2FT)

 

Applications: For quick installations, small to medium tiles, and indoor & outdoor surfaces.

All Product Categories

 

You can click the link to discover FİXA’s high-performance, professional solutions for ceramic applications of all sizes.

To access references where our Tile and Ceramic Adhesives have been used, visit

TILE AND CERAMIC ADHESIVES BY APPLICATION AREAS

  •  Ceramic Tiles
  • Granite Ceramics
  • Natural Granite
  • Marble
  • Glass Mosaic
  • Natural Stone
  • Terracotta
  • Biscuit Brick (Facing Brick)

  • Up to 10×10 cm
  • Up to 20×25 cm
  • Up to 33×33 cm
  • Up to 60×60 cm
  • Up to 60×120 cm
Seramik-Boyutuna-Uygun-Seramik-Yapistiricilari

  • Cement-Based Plaster
  • Cement-Based Screed
  • Exposed Concrete Surfaces
  • Betopan Surfaces
  • Underfloor Heated Floors
  • Gypsum Board (Drywall) Surfaces
  • PVC Fiberglass Surfaces
  • Metal Surfaces
  • Painted Surfaces
  • Ceramic Covered Surfaces – *On condition that ADHERA transition primer is used

  • Indoor Floor
  • Indoor Wall
  • Outdoor Floor
  • Outdoor Wall

For all the construction chemicals a building needs—from the foundation phase to its entire service life—you can contact us at info@fixaco.uk.

WHY TILE AND CERAMIC ADHESIVES?

Industrial Quality Standards

Reliable products with international certifications, performance-tested under the most demanding installation conditions.

Maximum Installation Efficiency

Solutions that eliminate mechanical fastening costs and provide labor savings by shortening application time.

Next-Generation Eco-Friendly Formulas

High-tech hybrid adhesive systems that are solvent-free, low-emission, and human-health friendly.

Fast and Practical Use

Easily applied in seconds, even on vertical surfaces, without requiring support thanks to its strong initial tack property.

Expert Engineering Support

Professional technical consultancy with project-specific bonding solutions, surface analyses, and application training.

FİXA Tile and Ceramic Adhesives – References

Dikmen Kara Harp Okulu

Turkcell Data Center Gebze

Turkcell Data Center Gebze

Dikmen Kara Harp Okulu

Beştepe Külliyesi

Frequently Asked Questions About Tile And Ceramic Adhesives

Which Adhesive Should Be Selected for Which Ceramic?

Selection should be made according to the size of the coating, water absorption rate and the type of the substrate (plaster, concrete, etc.) to be applied.

While standard adhesives cure in 24 hours, fast-setting (rapid) products can be opened to traffic within 3-6 hours.

: Yes; however, it is essential to roughen the surface or use special adhesion-promoting primers (filler primers, etc.) before application.

  • S1 or S2 class adhesives with high flexibility, resistant to weather conditions and thermal shocks, should be preferred.

It ensures equal distribution of the adhesive on the surface, preventing air gaps under the ceramic and increasing bonding strength.

Suitable primers for surface preparation, low-speed mixers for a homogeneous mixture, notched trowels for correct spreading and joint spacers are the basic auxiliary equipment.

  • The shelf life is 12 months in unopened original packaging and moisture-free environments. Products should be protected from sunlight and stored on pallets in cool areas.